manualshive.com logo in svg

SMC Networks 7908VOWBRA2, User Manual, Page: 85 / 151

Share
Download
SMC Networks 7908VOWBRA2 User Manual Download Page 85

A

DVANCED

 S

ETUP

4-49

NAT Mapping Table 

This screen displays the current NAPT (Network Address Port 
Translation) address mappings. 

NAT Mapping Table displays the current NAPT address mappings. The 
NAT address mappings are listed 20 lines per page, click the control 
buttons to move forwards and backwards. As the NAT mapping is 
dynamic, a Refresh button is provided to refresh the NAT Mapping Table 
with the mots updated values.

The content of the NAT Mapping Table is described as follows.

•

Protocol - protocol of the flow. 

•

Local IP - local (LAN) host's IP address for the flow. 

•

Local Port - local (LAN) host's port number for the flow. 

•

Pseudo  IP  -  translated  IP address for the flow. 

•

Pseudo Port - translated port number for the flow. 

•

Peer IP - remote (WAN) host's IP address for the flow. 

•

Peer Port - remote (WAN) host's port number for the flow. 

Summary of Contents for 7908VOWBRA2
























































































































































Reviews:

No comments