![background image](http://html1.mh-extra.com/html/smc-networks/7908vowbra2/7908vowbra2_user-manual_1300234023.webp)
C
ONNECT
THE
S
YSTEM
2-7
Connect the System
The Barricade can be positioned at any convenient location in your office
or home. It can also be wall-mounted. No special wiring or cooling
requirements are needed. You should, however, comply with the following
guidelines:
•
Keep the Barricade away from any heating devices.
•
Do not place the Barricade in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Barricade.
Phone/FAX Connection
Connect a standard telephone set or fax machine to the Phone (FXS) port
on the rear panel.
Connect the ADSL Line
Connect the supplied ADSL (RJ-11) cable from the port labelled ADSL on
the Splitter/Microfilter to the ADSL port on your Barricade. When
inserting the plug, be sure the tab on the plug clicks into position to ensure
that it is properly seated.
Attach to Your Network Using Ethernet Cabling
The four LAN ports on the Barricade auto-negotiate the connection speed
to 10 Mbps or 100 Mbps, as well as the transmission mode to half duplex
or full duplex.
Use RJ-45 cables to connect any of the four LAN ports on the Barricade
to an Ethernet adapter on your PC. Otherwise, cascade any of the LAN
ports on the Barricade to an Ethernet hub or switch, and then connect
your PC or other network equipment to the hub or switch. When inserting
an RJ-45 connector, be sure the tab on the connector clicks into position
to ensure that it is properly seated.
Summary of Contents for 7908VOWBRA2
