manualshive.com logo in svg

SMC Networks 7908VOWBRA2, User Manual, Page: 41 / 151

Share
Download
SMC Networks 7908VOWBRA2 User Manual Download Page 41

S

ETUP

 W

IZARD

4-5

ADSL Setting

Select your Country and Internet Service Provider. This will automatically 
configure the Barricade with the correct Protocol, Encapsulation and 
VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed in this screen, 
you will need to manually enter settings. Go to “Parameter Setting - 
Country or ISP Not Listed” on page 4-10 in the manual. 

If your ISP uses Protocols PPPoA or PPPoE you will need to enter the 
username, password and DNS Server address supplied by your ISP.

If your ISP uses Protocol RFC1483 Routed you will need to enter the IP 
address, Subnet Mask, Default Gateway and DNS Server address supplied 
by your ISP.

Note:

If your ISP has not provided you with a DNS address and the 
protocol is PPPoA, PPPoE or 1483 Bridging, you can leave this 
field blank. The Barricade will then automatically obtain the DNS 
address.

Click 

NEXT

 to continue.

Summary of Contents for 7908VOWBRA2
























































































































































Reviews:

No comments