![background image](http://html1.mh-extra.com/html/smc-networks/7204brb/7204brb_user-manual_1300194046.webp)
Entering the Admin Page
43
RIP Configuration
The [RIP System Wide Configuration] page allows the user to set
the configuration for the system wide configuration of RIP. The
actual RIP configuration is in the RIP Per Interface Configuration.
Wiring
Selection
This field allows the user to enter the wiring selection for
the RJ-11. [Tip/Ring] is the default for the board without
the inner/outer pair relay.
Bit Swapping This field allows the user to [Enable] or [Disable] the
upstream bit swapping.