![background image](http://html1.mh-extra.com/html/smc-networks/7204brb/7204brb_user-manual_1300194035.webp)
Configuration
32
Session Name This field allows the user to enter his own session
Name to distinguish different sessions for different
PPP accounts and different PVCs.
PVC
This field allows the user to choose the specific PVC
for PPP session.
Service Name
(PPPoE only)
The service name of PPP is required by some ISPs.
If the ISP does not provide the Service Name, please
leave it blank.
Disconnect
Timeout
The Disconnect Timeout allows the user to set the
specific period of time to disconnect from the ISP.
The default is [0], which means never disconnect
from the ISP.
MRU
Maximum Receive Unit indicates the peer of PPP
connection the maximum size of the PPP information
field this device can be received. The default value
is [1492] and is used at the beginning of the PPP
negotiation. In normal negotiation, the peer will accept
this MRU and will not send packet with information field
larger than this value.
MTU
Maximum Transmission Unit indicates the network stack
of any packet is larger than this value will be fragmented
before the transmission. During the PPP negotiation,
the peer of the PPP connection will indicates its MRU
and will be accepted. The actual MTU of the PPP
connection will be set to the smaller one of MTU and
the peer's MRU. The default is value [1492].
MSS
Maximum Segment Size is the largest size of data that
TCP will send in a single IP packet. When a connection
is established between a LAN client and a host in the
WAN side, the LAN client and the WAN host will indicate
their MSS during the TCP connection handshake.
The default value is [1432].
Authentication
When [Auto] option is chosen, the PAP mode will run
first then CHAP.
Automatic
Reconnect
When it is checked, it will maintain the PPP connection
all the time. If the ISP shuts down the PPP connection,
it will automatically reconnect PPP session.