manualshive.com logo in svg

SMC Networks 7204BRB, User Manual

Share
Download
SMC Networks 7204BRB User Manual Download Page 11

Configuration

8

Connecting to the Power Outlet

Connect the ADSL Barricade to the power outlet via the power 
adapter which is included in your ADSL Barricade package.

Checking Your Connections

Please check your connections before proceeding.

Powering Up

Power on your computer.
Power on the ADSL Barricade.
Proceed to Step "Configuring Your Computers".

Configuring Your Computers

This section provides instructions for configuring the Internet 
settings on your computers to work with the ADSL Barricade.

Before you begin

By default, the ADSL Barricade automatically assigns all required 
Internet settings to your PCs. You need only to configure the PCs 
to accept the information when it is assigned.

Note: 

In some cases, you may want to assign Internet 
information manually to some or all of your computers 
rather than allow the ADSL Barricade to do so. See 
Assigning static Internet Information to your PCs for 
instructions.

If you have connected your PC via Ethernet to the ADSL 
Barricade, follow the instructions that correspond to the operating 
system installed on your PC.

Summary of Contents for 7204BRB


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands