![background image](http://html.mh-extra.com/html/smc-networks/6924mt/6924mt_management-manual_1300664139.webp)
P
ORT
M
ENUS
3-45
Port Menus
Port Information
The Port Information screen displays the port status, link state, the
communication speed and duplex mode, as well as the flow control in use.
To change any of the port settings, use the Port Configuration menu. The
parameters are shown in the following figure and table.
Parameter
Description
Admin Status
Shows if the port is enabled or not.
Link Status
Indicates if the port has a valid connection to an external
device.
Speed Status
Shows the port speed (10M, 100M or 1000M).
Duplex Status
Displays the current duplex mode.
Flow Control
Status
Shows the flow control type in use. Flow control can
eliminate frame loss by “blocking” traffic from end stations
connected directly to the switch. Back pressure is used for
half duplex and IEEE 802.3x for full duplex. Note that flow
control should not be used if a port is connected to a hub.
Summary of Contents for 6924MT
