![background image](http://html.mh-extra.com/html/smc-networks/6924mt/6924mt_management-manual_1300664099.webp)
P
ANEL
D
ISPLAY
3-5
Console Configuration
If you are having difficulties making an out-of-band console connection to
the serial port on the agent module, you can display or modify the current
settings for the serial port through the Web agent. Click on the serial port
icon in the switch image to display or configure these settings, as shown
below.
Speed Status
Indicates the current port speed.
Duplex Status
Indicates the port’s current duplex mode.
Flow Control Status
Shows the flow control type in use. Flow control can
eliminate frame loss by “blocking” traffic from end stations
connected directly to the switch.
VLAN
The VLAN ID assigned to untagged frames received on this
port. Use the PVID to assign ports to the same untagged
VLAN.
Parameter
Default
Description
Baud rate
19200 bps
The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200, and auto
detection.
Note that when AUTO is selected, you need to
first press the Enter key once to set the data rate
and initialize the connection.
Time-Out
10 minutes
If no input is received from the attached device
after this interval, the current session is
automatically closed.
Range : 0 - 100 minutes; 0: disabled
Parameter
Description
Summary of Contents for 6924MT
