SMC Networks 6752AL2 - annexe 1, Installation Manual

Page: 26 / 80

A
BOUT THE
T
IGER
S
WITCH
10/100
1-6
Power Supply Receptacles
There are two power receptacles on the rear panel of the switch. The
standard power receptacle is for the AC power cord. The receptacle
labeled “RPU” is for the optional Redundant Power Unit (RPU).
Figure 1-4 Power Supply Receptacles
Features and Benefits
Connectivity
• 48 100BASE-TX ports for 10 or 100 Mbps Ethernet connections.
• 4 1000BASE-T ports (2 shared with SFP slots) for easy Gigabit
Ethernet integration and for protection of your investment in legacy
LAN equipment.
• Auto-negotiation enables each RJ-45 port to automatically select the
optimum communication mode (half or full duplex) if this feature is
supported by the attached device; otherwise the port can be configured
manually.
• RJ-45 ports support auto MDI/MDI-X pinout selection.
• Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or
better for 10 Mbps connections, Category 5 or better for 100 Mbps
connections, and Category 5, 5e or 6 for 1000 Mbps connections.
100-240V~ 50-60Hz 2A
RPU
DC
12V 4.5A