SMC Networks 6750L2, Installation Manual

Page: 22 / 78

A
BOUT THE
T
IGER
S
WITCH
10/100
1-6
Status LEDs
The LEDs, which are located on the front panel for easy viewing, are
shown below and described in the following table.
Figure 1-2. Port and System LEDs
Port Status LEDs
LED Condition Status
Fast Ethernet Ports (Ports 1~48)
Link/Act.* On/Flashing
Amber
Port has established a valid 10 Mbps network
connection. Flashing indicates activity.
On/Flashing
Green
Port has established a valid 100 Mbps network
connection. Flashing indicates activity.
Off There is no valid link on the port.
Gigabit Ethernet Ports (Ports 49~50)
Link/Act.* On/Flashing
Amber
Port has established a valid 10 Mbps or
100 Mbps network connection. Flashing
indicates activity.
On/Flashing
Green
Port has established a valid 1000 Mbps
network connection. Flashing indicates
activity.
Off There is no valid link on the port.
FDX*
(all ports)
On Green Port is operating in full-duplex mode.
Off Port is operating in half-duplex mode.
*Use the Mode Select button to select the LED display mode.