![background image](http://html.mh-extra.com/html/smc-networks/6750l2/6750l2_installation-manual_1300658049.webp)
A-1
A
PPENDIX
A
T
ROUBLESHOOTING
Diagnosing Switch Indicators
Power and Cooling Problems
If the power indicator does not turn on when the power cord is plugged in,
you may have a problem with the power outlet, power cord, or internal
power supply. However, if the unit powers off after running for a while,
check for loose power connections, power losses or surges at the power
Troubleshooting Chart
Symptom
Action
Power LED is Off
•
Internal power supply is disconnected.
•
Check connections between the switch, the power
cord, and the wall outlet.
•
Contact SMC Technical Support.
Power LED is Red
•
Internal power supply has failed. Contact your local
dealer for assistance.
Link LED is Off
•
Verify that the switch and attached device is powered
on.
•
Be sure the cable is plugged into both the switch and
corresponding device.
•
Verify that the proper cable type is used and its length
does not exceed specified limits.
•
Check the adapter on the attached device and cable
connections for possible defects. Replace the defective
adapter or cable if necessary.
Summary of Contents for 6750L2
