![background image](http://html.mh-extra.com/html/smc-networks/6750l2/6750l2_installation-manual_1300658045.webp)
4-1
C
HAPTER
4
M
AKING
N
ETWORK
C
ONNECTIONS
Connecting Network Devices
The TigerSwitch 10/100 is designed to interconnect multiple segments (or
collision domains). It may be connected to network cards in PCs and
servers, or to hubs, switches or routers.
Note:
Before connecting cables, you may want to first configure the
Spanning Tree Protocol to avoid network loops. Refer to the
Management Guide for more information.
Twisted-Pair Devices
Each device requires an unshielded twisted-pair (UTP) cable with RJ-45
connectors at both ends. For 100BASE-TX connections, Category 5 cable
is required; for 10BASE-T, Category 3, 4 or 5 cable can be used.
For 1000BASE-T connections, Category 5 or 5e (recommended) cable is
required with all four wire pairs connected. You should also test the cable
installation for IEEE 802.3ab compliance. See “1000BASE-T Cable
Requirements” on page B-5.
Cabling Guidelines
The RJ-45 ports on the switch support automatic MDI/MDI-X operation,
so you can use standard straight-through twisted-pair cables to connect to
any other network device (PCs, servers, switches, routers, or hubs).
Summary of Contents for 6750L2
