![background image](http://html1.mh-extra.com/html/smc-networks/6709l2/6709l2_management-manual_1300172090.webp)
C
ONSOLE
I
NTERFACE
4-22
Configuring Tag-based VLANs
Use the VLAN Configuration menu to create tag-based VLANs.
Field Attributes
When the VLAN mode is set “802.1Q” or “802.1QwithGVRP” (on the
VLAN Configure page), the following attributes are displayed.
•
PVID
– VLAN ID assigned to untagged frames received on the port.
(Default: 1)
•
Ingress Filter
1
(NonMember Pkt) – If ingress filtering is enabled,
incoming frames for VLANs which do not include this ingress port in
their member set will be discarded at the ingress port. (Default: Drop)
- Ingress filtering only affects tagged frames.
- If enabled, the port will discard incoming frames tagged for VLANs
which do not include this ingress port in their member set.
- If disabled, the port will accept any VLAN-tagged frame if the tag
matches a VLAN known to the switch.
- Ingress filtering does not affect VLAN independent BPDU frames,
such as GVRP or STP.
•
Ingress Filter
2
(Untagged Pkt) – Sets the port to drop untagged frames.
If only tagged frames are accepted, the switch will only accept frames if
the frame tag matches a VLAN to which this port has been assigned.
(Default: Forward)
Summary of Contents for 6709L2
