![background image](http://html1.mh-extra.com/html/smc-networks/6709l2/6709l2_management-manual_1300172115.webp)
P
ROTOCOL
R
ELATED
C
ONFIGURATION
M
ENU
4-47
Link Access Control Protocol Menu
Use the LACP menu to configure dynamic trunking whereby the switch
will automatically negotiate a trunked link with LACP-configured ports on
another device.
Command Usage
• To avoid creating a loop in the network, be sure you enable LACP before
connecting the ports; also disconnect the ports before disabling LACP.
• If the target switch has also enabled LACP on the connected ports, and
port members at one or both ends of the link are set to actively initiate a
link, the trunk will be activated automatically.
• If the number of active ports (i.e., Work Ports) is less than the number
of assigned port, all the other ports will be placed in a standby mode.
Should one link in the trunk fail, one of the standby ports will
automatically be activated to replace it.
• All ports on both ends of an LACP trunk must be configured for full
duplex, either by forced mode or auto-negotiation.
• The Spanning Tree Protocol must be enabled for LACP to function
properly. (See “Spanning Tree Protocol Menu” on page 4-35.)
TigerSwitch 10/100 :
LACP Configuration
=====================
Aggregator Setting
State Activity
LACP Status
Previous Menu
LACP setting.
Arrow/TAB/BKSPC = Move Item
Enter=Select Item
Menu
Description
Page
Aggregator Setting
Configures dynamic trunks
4-48
State Activity
Actively or passively configures a trunk
4-49
LACP Status
Shows trunks and associated ports, and
detailed information for dynamic links
4-50
Summary of Contents for 6709L2
