![background image](http://html1.mh-extra.com/html/smc-networks/2870w-annexe-1/2870w-annexe-1_manual_1298928054.webp)
Advanced Web Configuration (Access Point mode)
44
Go to Wireless | Advanced Settings in order to change the
Fragmentation and RTS thresholds. (Note: It is recommended to
leave these values at their default settings.)
RTS Threshold: Set the RTS (Request to Send) frame length. You
may configure the access point to initiate an RTS frame. If the
packet size is smaller than the preset RTS threshold size, the
RTS/CTS mechanism will NOT be enabled.
The access point sends Request to Send (RTS) frames to a
particular receiving station to negotiate the sending of a data
frame. After receiving an RTS, the station sends a CTS (Clear to
Send) frame to acknowledge the right of the sending station to
send data frames. The access points contending for the medium
may not be aware of each other. The RTS/CTS mechanism can
solve this “Hidden Node Problem.”
Summary of Contents for 2870W - annexe 1
Page 1: ......
Page 2: ......
Page 8: ......
Page 38: ...Configuring Your Computer 28 4 Click OK and click Close to continue and save the changes...