Filtering Commands
7-75
7
Global Configuration
Command Usage
This command is used in conjunction with the
filter ethernet-type protocol
command to determine which Ethernet protocol types are to be filtered.
Example
Related Commands
filter ethernet-type protocol (7-75)
filter ethernet-type protocol
This command sets a filter for a specific Ethernet type. Use the
no
form to disable
filtering for a specific Ethernet type.
Syntax
filter ethernet-type protocol
<
protocol>
no filter ethernet-type protocol
<
protocol>
protocol
- An Ethernet protocol type. (Options: ARP, RARP,
Berkeley-Trailer-Negotiation, LAN-Test, X25-Level-3, Banyan, CDP, DEC
XNS, DEC-MOP-Dump-Load, DEC-MOP, DEC-LAT, Ethertalk,
Appletalk-ARP, Novell-IPX(old), Novell-IPX(new), EAPOL, Telxon-TXP,
Aironet-DDP, Enet-Config-Test, IP, IPv6, NetBEUI, PPPoE_Discovery,
PPPoE_PPP_Session)
Default
None
Command Mode
Global Configuration
Command Usage
Use the
filter ethernet-type enable
command to enable filtering for Ethernet
types specified in the filtering table, or the no
filter ethernet-type enable
command to disable all filtering based on the filtering table.
Example
Related Commands
filter ethernet-type enable (7-74)
Enterprise AP(config)#filter ethernet-type enable
Enterprise AP(config)#
Enterprise AP(config)#filter ethernet-type protocol ARP
Enterprise AP(config)#
Summary of Contents for 2555W-AG2
