System Management Commands
7-11
7
show line
This command displays the console port’s configuration settings.
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
System Management Commands
These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Enterprise AP#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
Enterprise AP#
Table 7-4. System Management Commands
Command
Function
Mode
Page
Country Setting
country
Sets the access point country code
Exec
7-12
Device Designation
prompt
Customizes the command line prompt
GC
7-14
system name
Specifies the host name for the access point
GC
7-14
snmp-server contact
Sets the system contact string
GC
7-40
snmp-server location
Sets the system location string
GC
7-41
Management Access
username
Configures the user name for management access
GC
7-15
password
Specifies the password for management access
GC
7-15
ip ssh-server enable
Enables the Secure Shell server
IC-E
7-16
ip ssh-server port
Sets the Secure Shell port
IC-E
7-16
ip telnet-server enable Enables the Telnet server
IC-E
7-17
APmgmtIP
Specifies an IP address or range of addresses allowed
access to the management interface
GC
7-20
APmgmtUI
Enables or disables SNMP, Telnet or web management
access
GC
7-21
show APmanagement Shows the AP management configuration
Exec
7-21
Summary of Contents for 2555W-AG2
