VLAN Configuration
3-115
3
CLI
– This example shows the switch configured with primary VLAN 5 and
secondary VLAN 6. Port 3 has been configured as a promiscuous port and mapped
to VLAN 5, while ports 4 and 5 have been configured as a host ports and are
associated with VLAN 6. This means that traffic for port 4 and 5 can only pass
through port 3.
Configuring Private VLANs
The Private VLAN Configuration page is used to create/remove primary or
community VLANs.
Command Attributes
•
VLAN ID
– ID of configured VLAN (1-4094, no leading zeroes).
•
Type
– There are three types of VLANs within a private VLAN:
-
Primary VLANs
– Conveys traffic between promiscuous ports, and to
community ports within secondary VLANs.
-
Community VLANs
- Conveys traffic between community ports, and to their
associated promiscuous ports.
-
Isolated VLANs
– Conveys traffic only between the VLAN’s isolated ports and
promiscuous ports. Traffic between isolated ports within the VLAN is blocked.
•
Current
– Displays a list of the currently configured VLANs.
Console#show vlan private-vlan
4-153
Primary Secondary Type Interfaces
-------- ----------- ---------- --------------------------------------
5 primary Eth1/ 3
5 6 community Eth1/ 4 Eth1/ 5
Console#
Summary of Contents for 100BASE-TX
