Configuring the Switch
3-72
3
CLI
– The following example configures LACP parameters for ports 1-4. Ports 1-4
are used as active members of the LAG.
Console(config)#interface ethernet 1/1
4-104
Console(config-if)#lacp actor system-priority 3
4-122
Console(config-if)#lacp actor admin-key 120
4-123
Console(config-if)#lacp actor port-priority 128
4-125
Console(config-if)#exit
.
.
.
Console(config)#interface ethernet 1/4
Console(config-if)#lacp actor system-priority 3
Console(config-if)#lacp actor admin-key 120
Console(config-if)#lacp actor port-priority 512
Console(config-if)#end
Console#sh lacp sysid
4-125
Channel Group System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-00-E9-31-31-31
2 32768 00-00-E9-31-31-31
3 32768 00-00-E9-31-31-31
4 32768 00-00-E9-31-31-31
Console#show lacp 1 internal
4-125
Channel group : 1
-------------------------------------------------------------------------
Oper Key : 120
Admin Key : 120
Console#
Summary of Contents for 100BASE-TX
