3-12
I
NSTALLING
AND
C
ONFIGURING
N
ETWORK
D
RIVERS
If you installed the driver using EZStart and did not edit your
AUTOEXEC.BAT file to call STARTNET.BAT, see ”Using
STARTNET.BAT” below.
This completes the driver-loading procedure. Refer to the
Novell NetWare ODI Shell for DOS manual for further details
about running a DOS VLM client.
Using STARTNET.BAT
If you do not use EZdosodi or EZStart's “Automatic Novell DOS
ODI” installation procedure to automatically modify your
AUTOEXEC.BAT file to call STARTNET.BAT upon reboot, you can
modify it yourself, as shown below:
R E M
Change directory to DOS ODI driver
R E M
files.
CD \NWCLIENT
R E M
Load network software.
STARTNET
R E M
This batch file, STARTNET.BAT,loads
R E M
the DOS ODI driver and Novell
R E M
network shell program.
If you do not use the STARTNET.BAT file as described above, use
the following loading sequence to connect to a server:
LSL.COM
SMCPWR2.COM
IPXODI.COM
VLM.EXE
NET.CFG Keywords
NET.CFG keywords are described in the DOS ODI VLM Client
driver installation document on the SMC SuperDisk.
Summary of Contents for SMC9432BTX
