Rev. 1.2 of 12.2020
36
Packing, Transport and Storage
❖
No damage resulting from incorrect transport, unloading and storage is covered by the
warranty, and no related claims shall be handled by SMAY Sp. z o.o.
7.13.
Packing
The power supply units are protected during transport by the appropriate packaging. A
standard packaging consists of polystyrene corners, corrugated cardboard and packaging film.
The power supply unit shall be packed as shown below:
1)
Protect the power supply unit corners by means of polystyrene boards.
2)
Protect the front of the cabinet and all LEDs along with switches by means of corrugated
cardboard.
3)
The power supply unit shall be wrapped for moisture protection.
7.13.
Transport
It is recommended to transport
“ZUP” power supply units in their original packaging until
they reach their destination.
-
Use only appropriate means of transport, such as pallet trucks or forklifts.
-
In case the power supply units are transported manually, make sure the number of
engaged people is sufficient to secure and carry the load.
-
During transport and handling take into consideration dimensions and weight of the
power supply units.
2)
1)
3)
Summary of Contents for ZUP
