OPERATION
1. Make sure that the power cable is properly connected and turn on the car
power.
2. Blue LED & Red LED will be slowly blinking simultaneously and then
Blue LED will remain on. Blue LED light means BlackBox 3000 is now ready
for the event recording and is started the Normal recording (Continuous
recording).
3. The normal recording (Continuous recording) will be automatically started,
if it set with your PC.
4. The event recording will automatically begin by G-sensor with one short
“Beep” sound.
5. The event recording will start by pressing the [RECORD] button.
[Notice] Multiple impacts coverage
Flash memory captures the video data from the second impact even as the first
impact is still occurring. It will start writing, immediately after the first recording is
finished.
Take out SD memory card
Turn off the power and then check the BLUE LED light. Once the BLUE LED
light is off, take out the SD memory card.
11
Insert SD memory card
System Error Buzzer
“Beep” “Beep” sound will occur and the BLUE & RED LED light will blink
simultaneously when there is a system error or SD card is not inserted.
[Check the SD memory card!]
Turn off the power and then check the BLUE LED light. Once the BLUE LED
light is off, insert the SD memory card.
Rear View Camera
If the rear view camera is on, the rear view will automatically be on the
monitor.
