FUNCTION
Automatic start
Turn on the vehicle power, BlackBox 3000 will be automatically started. (Use
the provided power cable.) And Normal record will be started, if it set with your
PC.
G-Sensor Event record
The event recording will be automatically started by G-sensor.
G-sensor sensitivity can be set with your PC.
Each event file contains pre & post event.
Prior & post event time can be set with your PC
Event record by Record Button
Press the [RECORD] button to begin Event recording manually. Each event file
contains pre & post event.
SD Memory Card Format
Remove the power first. Press the [PLAYBACK] & [RECORD] button and
hold Then connect the power for initialization.
Once it done, all video & log files will be deleted.
And the configurations will default to the factory settings.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, BlackBox 3000 creates the last file
using the internal Super Capacitor.
10
Notice : The unit will not start recording immediately after power on.
It takes around 1 minute for the built-in power backup system to charge.
Thereafter, the internal flash memory will be ready to record.
BLUE LED (RECORD)
The blue LED shows the power is on.
The blue LED blink during event recording.
RED LED (OVERWRITE)
The red LED will be turned on during overwriting.
Buzzer
“Beep” sound will occur when event recording starts and to signal a system error.
