Smartwatch H20HVR16A16I, Operation Manual, Page: 34 / 186

User Manual of Digital Video Recorder
33
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. Some of the functions are listed below.
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen
on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: start all-day normal recording or motion detection recording for all channels.
•
Add IP Camera: automatically or manually add the online network camera(s).
•
Playback: play back the recorded videos for current day.
•
Output Mode: set the video output mode to Standard, Bright, Gentle or Vivid.
•
Aux Monitor: the device checks the connection of the output interfaces to define the main and auxiliary
output interfaces. See the table below for the priority level of the main and aux outputs.
Table 3. 2 Priorities of Outputs
HDMI/VGA CVBS Main output Auxiliary
output
1
√ √
HDMI/VGA CVBS
2
√
× HDMI/VGA
3 ×
√
CVBS

√
means the interface is in use,
×
means the interface is out of use or the connection is invalid. And the
HDMI, VGA and CVBS can be used at the same time.
When the aux output is enabled, you can do some basic operation in the live view mode for the Aux output,
while no operation is allowed for the main output.
3.2.1 Using the Mouse in Live View
Right-click on the live view window, and a live view toolbar appears on the top of the screen as follows:
Figure 3. 1 Live View Toolbar
Table 3. 3 Mouse Operation in Live View
Icon Description
Enter the menu of the system by clicking the icon.
Switch to the single full screen.
/ / / /
Adjust the screen layout by clicking the specific icon.
/
Switch to the previous/next screen.
/
Enable/disable the auto-switch of the screens.