Smartwatch H20HVR16A16I, Operation Manual, Page: 124 / 186

User Manual of Digital Video Recorder
123
Steps:
1) Click to activate the External Port Settings dialog box. Configure the external port number for
server port, http port, RTSP port and https port respectively.

You can use the default port number, or change it according to actual requirements.

External Port indicates the port number for port mapping in the router.

The value of the port number should be between 1 and 65535 and the value must be different
from each other. If multiple devices are configured for the UPnP™ settings under the same
router, the value of the port number for each device should be unique.
Figure 9. 18 External Port Settings Dialog Box
2) Click Apply to save the settings.
3) You can click Refresh to get the latest status of the port mapping.
Figure 9. 19 UPnP™ Settings Finished-Manual
9.2.6 Configuring Remote Alarm Host Settings
Purpose:
With a remote alarm host configured, the device will send the alarm event or exception message to the host when
an alarm is triggered. The remote alarm host must have the CMS (Client Management System) software installed.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Click the More Settings tab to enter the More Settings interface.