manualshive.com logo in svg

SmartSight S1600e, User Manual

Share
Download
SmartSight S1600e User Manual Download Page 39

User Manual

Getting Started

25

The CLI main menu appears.

The CLI has a timeout that is triggered after three 

minutes of inactivity. When the timeout occurs:

™

The “Thank you for using the SmartSight CLI.” 

message appears at the command line.

™

You are brought back at the Command Prompt 

command line. 

3

To reactivate the CLI, re-enter the 

telnet

 command.

4

To end the CLI work session:

™

Save the settings by entering s at the main menu, 

then pressing Enter.

™

Exit the CLI by entering q at the main menu, then 

pressing Enter.

Using the CLI 

To work through the CLI menu structure, follow these 

guidelines:

‹

To execute a command or open a menu, type in the 

corresponding letter or number, then press Enter.

‹

Entering p returns you to the previous menu, until you 

are back in the main menu.

‹

Entering s in the main menu saves all the changes you 

have made in the work session.

‹

To exit, enter q in the main menu. Depending on the 

changed settings, the unit may perform a soft boot.

Summary of Contents for S1600e


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands