Page 89
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: WPA2
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA2 Preauthentication
Network Re-Auth Interval
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
RADIUS Server IP address
Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
RADIUS Port
[1-65535] Port 1812 for authentication is a standard for RADIUS authentication per
the IETF RFC 2865. Your RADIUS deployment may differ from this. Older servers may
use port 1645.
RADIUS Key
Enter the encryption key required to authenticate to the Radius Server specified via
the Server IP address above.
WPA/WAPI Encryption
[AES, TKIP+AES] Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
