manualshive.com logo in svg

SmartRG SR552n, User Manual, Page: 58 / 117

Share
Download
SmartRG SR552n User Manual Download Page 58

Page 58

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA  l  +1 360 859 1780

SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014

smartrg.com

Static Route
Static Route is one form of manually configured, fixed route for IP data.

After selecting 

Advanced Setup -> Routing -> Static Route

, click the 

Add

 button and the following screen will appear. Click the 

Apply/Save

 button to commit the changes entered. Up to 32 entries may be added.

Field Name

Description

IP Version

[IPv4, IPv6] Select the IP version associated with the static route you wish to create. 

Destination IP address/prefix length

Enter the destination network address / subnet mask for route

Interface

WAN Interface(s) available for selection. This list filtered by to IP Version set in the first 
drop-down list.

Gateway IP Address

Destination IP address desired (/prefix length if needed)

Metric (optional)

[>=0]  Establishes traffic priority/weighting.

The individual fields on this screen are defined as follows:

Summary of Contents for SR552n






















































































































Reviews:

No comments