Page 46
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
Filter Name
A free-form text field. Enter a descriptive name for this filter.
IP Version
Version IPv4 applies by default. IPV6 can be alternately selected.
Protocol
[TCP/UDP, TCP, UDP, or ICMP] Select the protocol to be associated with this incoming filter.
Source IP address [/prefix length]
Enter source address for rule.
Source Port (port or port:port)
Enter source port number or range.
(Destination port numbers xxxxx:yyyyy).
Select All checkbox
Check as applicable to apply rule to all interfaces.
First WAN interface (e.g. pppoe
based) checkbox
Last WAN interface (e.g. ipoe
based) checkbox
Check each as applicable to effect rule on specific WAN interface(s). WAN interface(s)
available for selection will be those configured in Routing mode and with firewall enabled.
First LAN interface checkbox
Second LAN interface (as applica-
ble) checkbox
Check each as applicable for desired rule.
Bridged Interface checkbox
Check as applicable for desired rule.
The individual fields on this screen are defined as follows:
MAC Filtering
Your SmartRG gateway can block or forward packets based on the originating device. This MAC filtering feature is available only
in Bridging mode. For other modes, similar functionality is available via IP Filtering.
After selecting
Advanced Setup -> Security -> MAC Filtering
from the left sidebar, alter the Policy to FORWARD or BLOCKED as
desired.
