Changing MCS-to-Workstation Connections
A–5
To change to a direct connection, follow these steps:
1. Select
Serial
from the MCS Connection Settings
dialog box (see page 3–5).
2. Select
Connection Type: Direct Connect
for a direct
connection
.
3.
Select
Bit Rate: 9600 bits/s
for the transfer rate
.
Using a Dialed Connection
Cable an MCS workstation to an MCS through a dialed
connection, as shown in Figure A–2.
Figure A–2. Dialed Connection to an MCS Workstation
To change to a dialed connection, follow these steps:
1. Select
Serial
from the MCS Connection Settings
dialog box (see page 3–5).
2. Select
Connection Type: Dial in to MCS
for a switched
(dialed) connection.
3. Type the
MCS Phone Number.
4.
Select
Bit Rate: 9600 bits/s
for the transfer rate
.
Modem
Modem
To COM1, COM2, or RS-232 octocable
To a COM port
