Chapter 2. Attaching Cables and Powering On
2–18
Powering On the MCS
When you have Ethernet adapters installed in the MCS
and in the MCS workstation, you can connect a
workstation to an MCS through a TCP/IP network. To do
this, you must enter the MCS IP address when you power
on the MCS for the first time.
Note
If you do not know the IP address, contact your
network administrator.
For information
❐
About looking up an IP address when an Ethernet
adapter is installed in the MCS, refer to the
Administration Guide
❐
About moving the MCS to a different network with a
new IP address, refer to the Administration Guide
