5
User Manual
CHECK
TRACE
CONTROL
SmartPoint/SmartPoint One
2. SmartPoint description
Model
LED
Flashlight
Product
Type
Article
No.
SmartPoint front view
Company
Information
IP Class
FCC and IC
Information
optional
Humidity
Sensor
SmartPoint back view
3. SmartPoint activation
SmartPoints are delivered in “hibernation” mode and they need to be activated before they can be used. See 3.3 how to activate
the SmartPoint.
3.1 Stock keeping
In hibernation mode, SmartPoints are not actively measuring and reporting sensor readings. This mode ensures that the energy
stored in the device battery is only little used during stock keeping of the device. Upon delivery, the devices are in hibernation
mode and do not show any activity on the device itself nor in SmartView.
If you plan to not actively use the SmartPoint in the next month of delivery, it is advised to keep the device in hibernation mode.
Once the SmartPoint is activated, it cannot be put back to hibernation mode again.
3.2 Operational check in hibernation mode
The operational functioning of the SmartPoint can be checked in hibernation mode.
During the check, the LED of the device will blink and the SmartPoint transmits a few messages to SmartView, if an active
SmartLine network is detected.
•
Place the SmartPoint on the indicated position on the SmartMat.
• Hold it steady in place.
•
After
5 seconds
, the LED shows activity and the SmartPoint contacts the SmartLine
network.
•
Keep the SmartPoint steady in place for an additional
15 – 25 seconds.
The LED flashes long for
5 times
, remove the SmartPoint
immediately
from the Smart-
Mat.
