SmartGyro 106OM405, Operation Manual

Page: 27 / 52

23
PRODUCT OVERVIEW
SG60 Operation Manual
Alarm messages remain displayed on the alarm
page even if the failure is not present anymore.
In this case, however, the relevant message is
coloured in grey.
Figure 31
In the example above the overtemperature
failure in upper and lower bearings has been
fixed (grey colour) but the low pressure anom-
aly remains (acknowledged – green-).
The content of the alarm log page is not fixed,
but varies depending on the number and type
of detected anomalies.
As the number of anomalies gradually increas-
es, they are added to the list. Accordingly, the
bottom line always represents the most recent
one.
The column “Time” indicates the time of occur-
rence of the anomaly, while the column “code”
is a numerical code for identifying the anomaly.
Alarms not present anymore in the system can
be removed from the list (Figure 32), pressing
the paint brush symbol icon (Figure 29, (3)).
As in the performance monitor page (see next
paragraph), the bottom right corner shows the
ID number of the gyro the anomalies refer to.
Pressing the Home icon on the top right cor-
ner (Figure 29, (1)) will return you to the Home
page.
Figure 32