HAT880 SERIES DUAL POWER BYPASS CONTROLLER USER MANUAL
HAT880 Series Dual Power Bypass Controller 2019-07-11 Version1.1 Page 16 of 49
7.3
MAIN MENU
In main screen, press
key to enter into the menu interface.
1.Configuration
2.Data Calibration
3.
Historical Records
4.
Black Box Records
5.
AutoTrans./Restore
6. Start/Stop Genset
7.
Language
8. About
Press
Up/Down
key to choose parameters (the current line was
highlighted with black) and then press
Confirm
key to enter into the
corresponding display screen.
NOTE1
：
Default password is 01234 before going into parameter setting, users can change it to prevent others
changing the parameter settings. Please clearly remember the password after changing. If you forget it, please contact
SmartGen services.
NOTE2
：
Data Calibration is for factory use only and factory password must be inputted before using it.
