Lock, in order description below from AccessPassword and KillPassword does to be being
been inputting UnLock and Kill in the tag and the tag which has been once Kill must pay
attention again will be able to use..
SMARTAT-870 User Reference
64
8) Setting
1. [Protocol Ver.] : With OS versions of firmware
version PDA of RFID modules is unrelated .
2. [Hopping_Mode]: To be right will become
setting in Hopping Mode country-of-uses of
RFID modules and will be come out and the nil
which with S/W will be able to change.
3 [Scan Time]: Recognizes the tag of RFID, the timely basic
price which modules is 0, 0 when the user stands still until,
continuously accomplishes an order. Will be able to
change 1 first level comfort price.
4 [Buzzer Switch]: From RFID modules the tag
recognition [hayss] time lights Buzzer where
rings and puts out.
5 [Session Value]: Index value 1st time about low of early
stage once will read tag in 0.5 intervals and a data again
and the data which admits will read will admit, 2nd time
Power will become off and on about 30 second laters reset
(only the tag which does not read will read and when, use)
6. [Power Control]: The output configuration basic price of
RFID modules is 0 and Full Power (28dbm) is. Only set
price being big, decreased. For example 25dbm where the
index value draws out 3 from 3rd back 28 is output.
Figure 9. Setting