Longo Modbus Products LMP-1.MP2
room temperature instead of temp. value measured by CP panel.
Absolute PI out
: Result of PI calculation algorithm used for valve opening
Light intensity
: Actual light intensity measured by sensor on CP
Min. light intensity
: When
Light intensity
is lower than this parameter, LCD bar graph on CP turns
off
Remote temp. SP:
When
Local/Remote
parameter is active this parameter is taken into PI
calculation algorithm as SP.
SP up:
When this command changes to active, CP will increment SP for 1/10 of scale. It acts like
pressing on
Warmer
TB on CP.
SP down:
When this command changes to active, CP will decrement SP for 1/10 of SP range. It acts
like pressing on
Cooler
TB on CP.
Real Time clock
: Real time clock (HH:MM) value by Modbus RTU Master equipment for display on CP
panel. Displaying is enabled with
RTC Enable
command bit.
Temp. display Enable:
If this command is active, displaying of actual Room temperature on the CP
panel is enabled.
TB pressed:
This parameter indicates that any of TB is pressed.
6
