Level
Indication
Knock
（
Low
）
Beep*2
Open & Close the door
（
Middle/Factory
）
Alarm*15seconds
Force open
（
High
）
Alarm*3Minutes
OK
Alarm Sensitivity mode
There are three levels of sensitivity.
The flashing circle represents the current sensitity
level.
Choose the required level and
press “OK” . For example, to switch
from Factory setting to Low.
When the alarm system is triggered, the OK button will begin to flash. At the same
time, the PIN GENIE button on the back will rapidly flash a green and red light. To
deactivate the alarm, you can:
3
1
1
2
3
4
2
3
4
Press
Note:
If the setting switch of the
Alarm Mode has been turned
off, the Alarm Sensitivity Mode
cannot be chosen. Press
“OK” to return to Setting page.
No passcode preset
Alarm Mode turned off
(Middle)
Long press
Press OK to wake
up the screen
Mechanical keys
Rotate thumbturn
Press and hold the PIN GENIE button on the back panel for 3 seconds, or
Enter the passcode, or
Use mechanical keys, or
Rotate the inside thumbturn.
16
