28
User Administration Menu
Controlling the SMTCP-2 via TELNET
Commands may be sent transparently to the matrix via a TELNET connection to the
SMTCP-2. To use this function, use a telnet client such as Hyperterminal or PuTTY to connect
to the IP address of the SMTCP-2. You will be prompted for a username and password -
this will be the same as the login information via HTTP. Once logged in, the SMTCP-2 is
ready to accept the standard RS-232 commands. For a list of the available commands,
please see the user manual for the matrix you are using. Although the commands are not
echoed to the client display, the commands are being issued to the matrix. Should you
need commands to be echoed, please see the instructions for your TELNET client.
The User Administration menu allows you to
change the user name and password for the
SMTCP-2. The default user name for the SMTCP-2
is “Admin” and the password is “Pass”.
Once you modify the login information, press
the Submit button to make the changes.
Using the SMTCP module (continued)
