17
Male to Female Straight Cable (not provided)
How to properly create an RS-232 connection between a PC and most SmartAVI
RS-232 compliant devices
1. Connect a straight through male
to female RS-232 cable (shown on
right) to the RS-232 connector on
the PC.
2. Connect the other end of the cable
to the RS-232 compliant device.
3. Power on the device.
Establish a connection to your RS-
232 compliant device:
Setting up the Terminal
application:
Hyperterminal Settings
1. Open Hyperterminal on the PC (or use
the terminal client of your choice).
2. Use the default settings to create a
connection to the device (see settings
on left). Settings MUST match those
shown on the lower right.
3. Be sure that Flow Control is
None
.
4. The output of the device will be the
same as the PC.
Using RS-232 Control (optional)
