SMART Table 230i, User Manual

Page: 11 / 64

Chapter 2
Using Your SMART Table
After setting up your SMART Table as documented in the SMART Table 230i
Installation Instructions ( document 131863 ), you can use it on a regular basis.
Turning Your SMART Table On and Off
After you set up your SMART Table, you can turn it on or off by following the
procedures in this guide.
IMPORTANT
Your SMART Table is sensitive to infrared radiation. Therefore, turn off or remove
any pot lights or other incandescent lighting in the room and close any open blinds
or curtains before turning on your SMART Table.
To turn on your
SMART Table
Connect the power cable to a power bar, and then turn on the power bar.
OR
Connect the power cable to an outlet.
IMPORTANT
Your SMART Table’s surface does not respond to touch until the computer
completes its startup process. Therefore, wait 30 to 60 seconds after turning on
your SMART Table before touching the surface.
Your SMART Table’s computer and projector turn on. The computer completes its
startup process, and the SMART Table Activities software appears.
For more information on the SMART Table Activities software, see page 7.