Programming your TV, DVD and AMP modes
12
smart sliderX
No. Key
Function
10
SEPP
Opens the smart portal (if your STB is connected to the internet).
11
MENU
Enter the menu of the selected device.
12
EXIT
Exits Menu of the selected device.
13
▲
/
▼
/
◄
/
►
OK
Navigation key in a menu up, down, left, right.
Confirms menu selection.
14
INFO
Displays information of the selected device.
15
BACK
STB Mode: Back to the previous menu item.
Other modes: Text stop.
16
EPG
Opens the Electronic Program Guide.
17
P+/P-
Select the next or the previous channel of the selected equipment.
18
Control the volume of the selected equipment.
19
Full screen mode (only for smart portal).
20
Colored
keys
Fast text function.
21
PVR
PVR / media player functions:
►
▌▌
Play/Pause,
►►
Fast Forward,
■
Stop,
◄◄
Rewind,
Previous chapter / previous track,
Next chapter
/ next track, Record: This key works the same way as the one on your
original remote. In order to avoid a mistake you have to press this key
twice to activate this feature.
22
AUDIO
Displays the audio menu of the selected equipment (when available).
23
16/9
Changes the size of the image (4/3, 16/9, etc...)
24
HELP
Opens the smart support homepage (only if your STB is connected to the
internet).
25
USB
Selects an external source (SCART, HDMI, USB ...).
Important:
The STB key is dedicated to your smart STB. It is not possible to change the code of
this key to control another type of equipment. When programming your remote control, before
entering in Setup Mode, make sure your remote control is in TV, DVD or AMP Mode. If the re-
mote control is in STB Mode, you will not be able to enter in Setup mode.
5 Programming your TV, DVD and AMP modes
Note:
you can dedicate any appliance (TV, DVD, SAT...) to the DVD and AMP modes: you just
need to enter the 4 digit code (found in the code book) of the appliance, i. e. a VCR code under
the AMP key. In any case, follow the steps below:
1. Make sure your equipment is switched on (for example TV).
