SMART BOARD 8055i-G5, Administrator'S Manual

Page: 76 / 84

APPENDIX B
REMOTELY MANAGING THE INTERACTIVE FLAT PANEL
66 smarttech.com/kb/171000
Command Response Possible values Standby
mode
get modelnum modelnum= [Value] [Model number] No
get serialnum serialnum= [Value] [Serial number] No
get proximityinstalled proximityinstalled= [Value] yes
no
get proximity proximity= [Value] on
off
Yes
get proximityreenable proximityreenable= [Value] 1–10 Yes
get proximitydetected proximitydetected= [Value] yes
no
No
get monitorid monitorid= [Value] 1–100 No
get powersave powersave= [Value] on
off
No
get fbc fbc= [Value] on
off
No
get waketotouch waketotouch= [Value] on
off
No
Use the following commands to assign system information settings.
Command Possible values Response Standby
mode
set autopoweroff [Value] + [Incremental value]
- [Incremental value]
=15–240
autopoweroff= [Value] No
set factoryreset [Value] =yes factoryreset= [Value] Yes