CHAPTER 3
USING THE INTERACTIVE WHITEBOARD SYSTEM
27
smarttech.com/kb/170911
NOTES
l
To connect the interactive whiteboard, see the
SMART Board 800ix3 interactive
whiteboard system installation guide
).
l
To connect accessories to the interactive whiteboard, refer to the documents included with
the accessories and consult the SMART Support website (
) for
additional information.
Using the interactive whiteboard
Refer to the
SMART Board 800 series interactive whiteboard user’s guide
) for in-depth information on using the interactive whiteboard and its
features.
When you connect the SMART Board interactive whiteboard to a computer that has SMART
software installed, you can access the interactive whiteboard‘s full capabilities.
For more information on this software, press the Help button on your interactive whiteboard pen
tray.
For additional resources, go to
, where you’ll find up-to-date, product-
specific information, including setup instructions and specifications.
The SMART training website (
) includes an extensive library of training
resources you can consult as you learn to set up or use the interactive whiteboard system.
Using the Extended Control Panel (ECP)
The ECP gives you control of the basic operations of the interactive whiteboard system. Press the
Power
button on the ECP or remote control to put the projector system into Standby mode or
turn it on. Press the Input button on the ECP or remote control to switch sources on the projector.
IMPORTANT
l
Keep the remote control in a safe place because there is no other way to access menu
options.
l
Do not disconnect cables from the ECP to connect peripheral devices because you could
disconnect controls for your interactive whiteboard.
