CHAPTER 3
USING THE INTERACTIVE WHITEBOARD SYSTEM
15
smarttech.com/kb/170911
Setting
Use
Notes
V-Position
Moves the vertical position of
the source video up or down
from -5 to 5 (relative to the
projected image).
Don’t adjust this setting unless you’re advised
to by SMART Support.
Apply this setting only after you make all
boom adjustments.
This setting is useful in situations where the
source video is cut off.
White Peaking
Adjusts the image color
brightness from 0 to 10 while
providing more vibrant white
shades.
A value closer to 0 creates a natural image
and a value closer to 10 increases brightness.
The default is 10.
Degamma
Adjusts the color performance
of the display from 1 to 3.
The default is 2.
Color
Opens a sub-menu for
adjusting the Red, Green, Blue,
Cyan, Magenta and Yellow
colors on the projector from 0
to 100, providing custom color
and luminance output.
Each color has a default value of 100.
Adjustments to the color settings register
under the User mode.
Image Adjustment menu (HDMI1 and HDMI2 inputs)
Display Mode
Indicates the projector’s
display output
(SMART Presentation,
Bright Room, Dark Room,
sRGB and User).
The default is SMART Presentation.
Brightness
Adjusts projector brightness
from 0 to 100.
The default is 50.
Contrast
Adjusts the difference
between the lightest and
darkest parts of the image from
0 to 100.
The default is 50.
White Peaking
Adjusts the image color
brightness from 0 to 10 while
providing more vibrant white
shades.
A value closer to 0 creates a natural image
and a value closer to 10 increases brightness.
The default is 10.
Degamma
Adjusts the color performance
of the display from 1 to 3.
The default is 2.
