SETTING THE DRIVE RECORDER
To record the car signal with video, set the Alarm configuration as below:
To use the Alarm as an Event trigger, (i.e: so Event recording will start when a
door is opened or a Meter is on) set the Alarm configuration as below:
G-SENSOR SETTINGS
If G-Sensor sensitivity value is too high (like 1), it may be too sensitive, so it will
detect even a light impact or light turn. If the G-Sensor sensitivity value is too dull,
it may not detect a notable incident. So, sensitivity should be set in consideration
of a vehicle’s suspension, condition and also the road condition.
If you do not want to record an Event by G-Sensor, un-check Event Record box
.
33
ALARM SETTINGS
