FUNCTION (MAIN UNIT)
Automatic start
Turn on the vehicle power, SVC300GPS will be automatically started. (Use the
power cable provided).
Event record
The Event recording will be start automatically by the Alarm 1 to 3 or by the
G-Sensor level.
Panic record
The Panic recording can be started by pressing the RECORD button.
Normal record (Continuous record)
The Normal record will be automatically started after power on.
The SVC300GPS will not make a separate event file during the continuous
recording. It will mark the Event area as ‘Alarm1~3’, ‘G-Sensor’ or ‘Record button’
In the continuous recording file which can be easily searched for during playback.
Live screen and Camera3 (Rear View)
SVC300GPS will display the live screen on the monitor.
The camera channel can be changed using the Information OSD.
If camera 3 (Rear View camera) is on, the live display channel will automatically
switch to camera 3. To use camera 3 as an automatic rear view camera then pow
er it from the vehicles reverse lights, when the reverse light comes on the camera
will be displayed on the monitor automatically.
Playback in the car
Recorded files can be played back in the car.
SD Memory Card Format
Remove the power first. Press the SD CARD FORMAT button and hold. Then
connect the power for initialisation. Once complete, all video & log files will be
deleted and the configurations will default to the factory settings.
10
NOTE: The unit will not start recording immediately after the power is turned on.
It takes around 1 minute for the built-in power backup system to charge. Thereafter, the
internal flash memory will be ready to record.
NOTE: PC Viewer software is pre-loaded on the SD card. Please ensure you have
installed the software to your PC before you format the card