APPENDIX (Firmware Upgrade)
Make [program] folder at SD root folder as below,
Copy “SVC150_X.X.X.bin” file in to the SD card [program] folder.
1. Preparing Firmware
2. Upgrade SVC150GPS
1.
Insert the prepared SD card to SVC150GPS and turn on the power.
2.
The Blue & Red LED will quickly blink while the unit is upgrading. It will als
o “Beep” continuously, Upgrading the unit usually takes about 2 to 3 minut
es.
3.
Once the upgrading has finished, the unit will automatically turn itself off
and then automatically turn itself back on again.
4.
If SVC150GPS records as normal, turn off the power.
5.
Insert the SD card into your PC and format it using the software once you
have successfully tested the unit
Warning: Do not turn off the power during upgrading.
If the upgrade fails, the SVC150GPS unit should be returned to your local
distributor
.
NOTE:
To get the upgrade firmware, please contact your local distributor.
55