OPERATION
14
Take out SD memory card, when the SVC150GPS-LC is under permanent
power.
Push the BLUE button (SD Format button) for about 5 seconds until the unit
beeps and the 2 LEDs are blinking together.
You can now take the card out of the unit. The LEDs will continue to blink, to
show that no card is detected.
System Error Buzzer
A ‘Beep Beep’ sound will occur and the BLUE & RED LED lights will blink
simultaneously when there is a system error or SD card is not inserted.
Check the SD memory card when this occurs.
Input the SD memory card, when the SVC150GPS is under permanent
Power.
Input the SD Card into the slot and push the blue (format) button for 2~3
seconds. The LEDs will stop blinking and the reboot will start automatically.