Using the DT770
21
3. Press the large
Pen Tray
button on the left side of the dialog.
4. To change the function of the Keyboard function button or the Right-Click pen tool button,
press the arrow beside the appropriate graphic and select the function you’d like.
5. Press
OK
to apply the new settings.
Setting the Pen Tool Defaults
You can set up the DT770 so that a particular pen tool is active when you turn it on.
NOTE:
This feature is not available if your DT770 is connected to a Mac computer.
1. Press the
SMART Board
icon in the system tray (Windows operating systems) or in the Dock
(Mac computers), and press
Control Panel
.
2. Press
Pen and Button Settings
.
3. If the dialog box displays more than one SMART product, press
Sympodium
.
4. Press the
Default Settings
button.
The
Sympodium Pen Tool Function
dialog box appears.
5. Set the default pen tool function to either
Last pen tool used
or to a specific pen tool.
6. Press
OK
to apply the new setting.
Enabling Pen Touch Only or Finger Touch Only Mode
By default, the DT770 automatically switches between detecting your finger (when the tethered
pen is in the pen recess) and detecting the pen (when the tethered pen isn’t in the recess).
However, you can disable the DT770’s ability to detect your finger by switching to Pen Touch Only
mode. Similarly, you can disable the DT770’s ability to detect the tethered pen by switching to
Finger Touch Only mode.
NOTE:
This feature is not available if your DT770 is connected to a Mac computer.
To set the pen tool default
The currently
selected SMART
product is
surrounded by a
blue border
