Appendix D
Managing SMART
Board MX series displays using RS-232
smarttech.com/kb/171555
118
Get command
Set command
Response
get volume
set volume[Value]
Where
[Value]
is one of the following:
l
+[Value]
l
-[Value]
l
=[0–100]
volume=[Value]
Where
[Value]
is a number between 0
and 100
get mute
set mute[Value]
Where
[Value]
is one of the following:
l
=on
l
=off
mute=[Value]
Where
[Value]
is one of the following:
l
on
l
off
get fwversion
fwversion=[Value]
Where
[Value]
is the firmware version.
get serialnum
serialnum=[Value]
Where
[Value]
is the display’s serial
number.
Note
If multiple displays are connected, the
response includes the serial numbers
for all displays, separated by
commas.
get partnum
partnum=[Value]
Where
[Value]
is the part number,
including the revision.
get videofreeze
Note
This command is only available in
SMART
Board MX firmware 1.8.7 or
later.
set videofreeze=[Value]
Where
[Value]
is one of the following:
l
=on
l
=off
Note
This command is only available in
SMART
Board MX firmware 1.8.7 or
later.
videofreeze=[Value]
Where
[Value]
is one of the following:
l
on
l
off
Note
This command is only available in
SMART
Board MX firmware 1.8.7 or
later.